Detailed description of the all-steel central test bench:

All steel cabinets on the all-steel central test bench are made of 1.2mm thick high-quality cold-rolled steel sheets. The surface is pickled and phosphatized, and the surface is coated with epoxy resin electrostatic powder. Overall stability and rationality, good acid and alkali resistance, corrosion resistance. Rack: The support beam is 60×40mm cold-rolled rectangular steel pipe. The support column is cold-rolled channel steel with the same specifications on both sides of the steel pipe. The surface is coated with colored zinc as anti-rust pretreatment. After carbon dioxide cold welding, pickling, phosphating, electrostatic spraying treatment of acid and alkali resistant surface treatment. The protective layer is attached to the protective layer. Through the impact test, the static load is >250 kg, and the support column can directly suspend the locker without damaging the wall.

The following is an introduction to the structure of the all-steel central experimental platform.

1. Countertop: a, solid core physicochemical plate countertop b, epoxy resin countertop

2, cabinet: 1.2mm thick high-quality cold-rolled steel plate, the surface is pickled, phosphating, uniform gray epoxy spraying, chemical anti-rust treatment, acid and alkali corrosion resistance.

3, cabinet doors and drawers: 1.2mm thick high-quality cold-rolled steel plate, the surface is pickled, phosphating, uniform gray epoxy spraying, chemical anti-rust treatment, acid and alkali corrosion resistance.

4. Handle: A type of dark handle that is formed by bending the door and the drawing panel.

5, hinge: high-quality brand, two-stage force 110 degrees, can open and close more than 100,000 times.

6. Guide rail: The guide rails on both sides of the drawer are made of high-quality load-bearing three-section guide rails, which are treated with baking paint.

7. Feet: The high-quality brand foot can be used to adjust the height and level freely, and the height is +25mm.