What are the characteristics of the all-steel test bench:

        The all-steel test bench is one of the types of test benches. At present, there is another steel-wood test bench. The all-steel test bench is the development trend of the test bench. It has already shown a good selling trend in the market, replacing the steel-wood test bench. Time issues, related to the accessories of the all steel test bench:

        1, safety socket: according to the specific requirements of the laboratory can be customized purchase.

        2. Power-off short-circuit protector: The shell is made of fire-resistant and high-temperature resistant materials.

        3, test faucet: test faucet materials are 2.5-3mm thick cast copper material, ceramic valve core. Surface epoxy powder spray. Copper pipe joints, faucets.

        Spout configuration

        a, triple faucet: high water nozzle with a pointed nozzle, two ends with a low nozzle with a slow nozzle.

        b, double tap: with slow flow nozzle.

        c, single tap: for the sharp water nozzle.

        d, the T-shaped and right-angle faucets used in the cup slot are all pointed nozzles.

        4, the sink: thickness of 5mmPP material, with strong acid and alkali resistance, corrosion resistance.

        All steel cabinets are made of 1.2mm thick high-quality cold-rolled steel plate as the substrate mechanism, acid-washed and phosphatized, and the surface is sprayed with epoxy resin. The overall stability is reasonable and reasonable, anti-acid and alkali resistance Excellent corrosion performance. All steel test benches can be solid core physicochemical panels, veneers (epoxy board, phenolic resin board, granite, stainless steel countertops, ceramics, etc., available for selection). All steel test bench color is black.

        All-steel experimental bench frame: the supporting beam is 60*40mm cold-rolled rectangular steel pipe, the supporting column is welded with cold-rolled channel steel on both sides of the same specification steel pipe, the surface is plated with color zinc for anti-rust pretreatment, and then acidified by carbon dioxide cold welding. Washing, phosphating and electrostatic powder coating epoxidized resin protective layer for acid and alkali corrosion resistant surface treatment, the protective layer adhesion is tested by falling object impact test, static load bearing >250 kg, support column can directly hang the hanging cabinet, No need to destroy the wall.

       All steel test bench reagent rack, laminate: 1.2mm thick high-quality cold-rolled steel plate is formed by substrate mechanism, the laminate is 10mm thick frosted glass, double-layer structure, with different heights of holes, can be adjusted according to actual needs. .

       Socket: It adopts laboratory-specific safety products. It has the functions of dustproof, splashproof, waterproof, acid and alkali resistance. The material is fire retardant for PC material.

Slide rail: the introduction of German technology, three heavy-duty ball slides, strong load bearing, good sliding performance, no noise.

       Hinge: Introducing British technology, 175° high quality chrome steel hinge.

       Handle: One-word dark handle, aluminum alloy / PVC.

Sink: high-quality PP sink for laboratory, good acid and alkali resistance. All steel test faucet: laboratory special faucet, copper porcelain valve core, the whole surface is sprayed with epoxy resin electrostatic powder.

       Three test faucets: three special test faucets for laboratory, copper material, surface treated with EPOXY, can prevent acid and alkali and rust. Adjustable combination of feet: anti-skid, shock absorption, acid and alkali resistance, corrosion resistance, strong load bearing Features.

       The table top of the all-steel test bench is an important part for the test bench. Because of its long-term exposure, it is easy to be damaged by contact with instruments and chemical reagents during use. Therefore, it is necessary to pay special attention to the treatment and selection of the countertop. .

        a) On-site construction: When the panel joints are to be bonded at the construction site, the process should be the same as the bonding method in the factory. It must be connected with special adhesives, as well as the specified fixtures and construction methods. The cutting, rounding and gutter processing of the department shall be processed before the factory and shall not be processed on site.

        b) When installing, the adjacent table tops should be on the same level and the edges should be aligned. Appropriate support devices must be provided to avoid the collapse of the table top due to insufficient supporting force. When joining the deck, the joint gap must not exceed 3.175mm (1/8") and should be kept flat.

        c) After the installation work is completed, the debris on the countertop must be carefully removed and cleaned and maintained with special maintenance oil.

        d) Provide the correct position and size of the opening for the necessary sink and utility system fittings.