Discussion on the Selection and Specification of All Steel Experimental Bench
With the help of the all-steel experimental platform, more operators can feel its convenience and safety, ensuring that their characteristics and differences are understood in future experiments, and thus the advantages of the equipment are widely recognized. More information about the all steel experimental platform will be introduced by the editor below.
All steel experimental platform purchase specifications:
⑴ Experimental bench width
The width of the experimental scale is 750mm, the width of the standard central table is 1500mm, and the width of the precision instrument table is generally 800-1000mm.
⑵ Experimental bench height
The desktop height should generally be 850mm, and if the experimenter has a taller body, it is best to choose 900mm; On the contrary, 800mm is recommended. In order to carry out some special experimental work, it is necessary to specify the corresponding table height. There are a large number of test devices on the table, and the test area can be appropriately expanded, but it should be convenient and safe to operate. The clear width on the side of the test bench is generally 650mm. The width of the reagent bottle rack should be 200-300mm. Therefore, the width of the double-sided test bench can reach 1500-1600mm, and the width of the single-sided test bench can reach 750-850mm.
⑶ Length interval
The length of the experimental platform is generally 750mm, preferably not exceeding 4500mm.
(4) Table top
The tabletop structure of the medicine bottle bracket should be firm, and the edge of the shelf should have raised edges to prevent the medicine bottle from falling. Generally, it is a two-layer reagent bottle rack, with an upper layer of 300mm high and a lower layer of 250-400mm. If necessary, the fluorescent lamp can be reinstalled to observe the scale of the instrument during the experiment. The lower layer of the medicine bottle rack should be left empty, and drip basins should be set up. The liquid on the all steel experimental table can be discharged through a drip tank. A water outlet can also be installed in the middle of the experimental platform, making it easier to drain water during flushing.